Some additional engineering necessary…

Just a quick note – The steering column and quickener needed some more effort. If something related to steering is off .05 from the center, it’s off a lot. 😐 After welding I re-assembled and found about 20 degrees of friction when turning. I stupidly assumed that the ID (inner diameter) of the column and the ID of the spline adapter were different and that’s why I tried to center the adapter from the outside. (Metric car made in Mexico – Adapter in the US) I cut it off to re-weld and was shocked to find that the ID of both were .755 and .753 respectively.

Instead of centering from the outside, all I needed was a metal pin that was exactly 3/4″. And that’s exactly what we did. My buddy Erik was able to find a steel dowel pin from McMaster for $2.32, he shipped it to his office and we welded it up and tested it last night. Check out the video of the Dodge Rally Neon steering quickener test.

This entry was posted in 2GN Rally Prep, Uncategorized and tagged , . Bookmark the permalink.

Comments are closed.